HORIZONTAL TEMPERING FURNACE
TYPE VTR-5050/48F
Horizontal retort furnace for vacuum tempering. The pumping system, power supply, and cooling systems are appropriately sized to accommodate a broad spectrum of industrial heat treatment applications, encompassing tempering, degassing, annealing, and solution heat treatment. A hot gas recirculation fan ensures rapid and uniform temperature elevation, streamlining the tempering process within an automatically sequenced cycle. The cooling gas recirculation system incorporates an external blower to enhance both the uniformity and pace of charge cooling during quenching.
General information:
/ Manufacturer: SECO/WARWICK,
/ Year of production: 2005,
/ Localization: Southern Italy,
/ The furnace is operational: testing on site possibility,
/We offer the furnace technical assessment, relocation and installation at the destination place in E.U.
![Horizontal tempering furnace Second hand horizontal tempering furnace](https://www.secowarwick.com/wp-content/uploads/2024/03/Horizontal-tempering-furnace.jpg)
![tempering furnace Second hand horizontal tempering furnace](https://www.secowarwick.com/wp-content/uploads/2024/03/tempering-furnace.jpg)
Technical data
Basic data |
|
Useful dimensions (W x H x L) | 900 x 800 x 1200 mm |
Maximum hearth load | 1200 kg |
Temperature | |
Maximum temperature | 750°C |
Temperature uniformity (empty furnace after equalising) | ± 5°C |
Maximum operating pressure | 1o50 mbar |
Purging vacuum | range 10-2 mbar |
Maximum leak rate (clean, cold and empty furnace) | 1 x 10-3 mbar x l/s |
Total weight | ca. 7000 kg |
Vacuum chamber | |
Materials: | |
* structure | mild steel |
* thermal insulation | ceramic insulating fiber blankets |
* heating elements | Kanthal A1 |
Heating power | 160kW |
Heating zones | one |
Heating element distribution | all around workload |
Type of heating elements | heating coils |
Door closure | third clamping flange operated by linear actuator |
Retort | |
Material | 1.4828 |
Retort volume | 4,0 m3 |
Pumping system | |
Rotary piston pump | 290 m3/h |
* motor rating | 5.5 kW |
* type | SV 300 Leybold |
Root’s pump | 310 m3/h |
* type | VWC KAESR |
* motor power | 1,5 kW |
Turbo cooling system | Type DP-1 |
Blower motor rating | 15 kW |
Instrumentation | |
Thermocouples | Type K |
Pressure transmitter | Endress & Hauser |
Temperature controller/programmer | built-in PLC |
Over-temperature controller | UDC 100L Honeywell |
Vacuum transmitter | TTR – 211S Leybold-Vacuum |
* measuring range | 1 x 10-3 to 103 mbar |
Programmable Logic Controller (PLC) |
SLC 500 Allen-Bradley |
Operator’s interface |
Pentium III, 850 Mhz FCPGA FSB100Mhz, 256 kB, 128 Mb RAM, 24xCD-ROM, HDD-2.5’’, 20Gb, 2 years guaranty |